TQC coating thickness gauge is ideal for measurement tasks in various industries and paint applications.
Product Description
- 128×128 dot matrix display
- Two measuring modes: Single and continuous
- Two group modes: direct (DIR) and general (GEN)
- Zero point calibration and multi-point calibration (up to 4 points) for each group
- Possibility to recall and delete specified readings or delete group readings
- Three different probe modes; auto, magnetic and eddy current
- Possibility to set high or low limit alarm for each group
- Power off automatically
- USB interface for data transfer
- Low battery and error indication
Specification
- Measuring Principe: F probe = magnetic induction / N probe = eddy currents
- Measuring range: 0-1300μm / 0 to 51.2 mils
- Accuracy: ±3% + 2μm (0.078 mils)
- Resolution: 0μm – 999μm (1μm) / 0 mils – 39.39 mils (0.01 mils)1000μm – 1300μm (0.01mm) / 39.4 mils – 51.2 mils (0.1 mils)
- Calibration: One point to four points calibration, zero point calibration, basic
- Data group: One direct group (readings not stored in memory) Four general group (readings will be stored automatically) NOTE: each group has individual statistics, alarm limit settings and calibration
- Statistics: No. of readings, mean, minimum, maximum and standard deviation
- Units: μm, mm and mils
- Alarm: User can set high/low alarm limit, alarm icon displayed on LCD when over limit
- Min. curvature radius convex: 1.5mm
- Min. curvature radius concave: 25mm
- Min. measuring area: Diameter 6mm
- Min. thickness of substrate: Fe – 0.5mm (0.02”) / NFe – 0.3mm (0.012”)
- Max. Measuring rate: 2 readings p/s
- Computer interface: download data via USB
- Power supply: 2 x 1.5V AAA battery
- Operation environment: Temp: 0 to 40°C (32 to 104°F) / Humidity: 20% to 90%
- Storage environment: Temp: -20 to 70°C (-4 to 158°F)
- Standard Compliance: ROHS WEEE
- Size: 110mm x 53mm x 24mm (4.33”x 2.09”x 0.94”)
- Case material: ABS 92g (3.24oz)
