The table type tensile (compression) testing machine has great configurations of volume planning and operation. With servo motor and sophisticated ball screw which is suitable for under 5KN test. Standard equipped with sophisticated hand wheel which can be in precision and it convenience to calibration and adjust displacement. According to the length of specimen and the elongation have different stroke for optional. Also, we provide completed fixture planning which can proceeding variety of test method. This model is using special testing software M1F which is used Windows 7/8 /10 of Person computer.
ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228
Product Description
Features :
- Automatic reading of load cell feature information
- Automatic reading of displacement sensor feature information
- force display, displacement display, time display, stress display and strain display
- External analog input (2-channel simultaneous reading of voltage or current)
- Test force automatically zero
- Test force self-defined calibration
- Break detection
- Automatic return
- Force overload protection
Specification
Model: | QC-548M1F | |
Max. Capacity: | 5 kN | |
Units: | Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) | |
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg | ||
Force Resolution: | 31 bits | |
Force Precision: | 1/100,000 | |
Test stroke(w/o grip): | 800mm | |
Stroke resolution: | 0.0001mm | |
Cantilever distance: | 70mm | |
Speed range: | 0.2 ~ 1000mm/min (Can be set by computer digital) | |
PC-Port: | RJ45(TCP/IP)[software optional] | |
Data sampling rate: | Max.400Hz | |
Motor type: | Servo Motor | |
Power Supply: | Single phase 200 ~ 240VAC,5A | |
Dimension of Machine: | 50× 53 × 145cm | |
Weight of Machine: | 80 kg |