This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method. The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.
JIS-K7125, P8147, ASTM-03247, IS0-8295, TAPPI-T816
Product Description
This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method. The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.
Specification
Test Method | Paper and Paperboard | Plastic Film |
Weight | 111160 mm, L100 mm, Mass 1,000 g | 63 x 63 mm (Abrading Surface 40 em”), Mass 200 ± 2 g (1.96 ± 0.02 N) |
Flat Board | W200 mm, L380 mm | |
Specimen | Surface: W100 mm, L250 mm | WBO mm, L200 mm, T0.5 mm or Less |
Sled: 111160 mm, L120 mm | ||
Friction Measuring | Load Cell: Max. 10 N, 20 N, 50 N | |
Speed | 10.0 ± 0.2 mm/min | 100 ± 10 mm/min or 500 ± 10 mm/min |
Accessories | – | Accessory Plate (Mass Less than 5 g) |
Option | Variable Speed Spec, Software, Recorder, Heating Plate Spec. | |
Power Source | AC 100 V, 1-Phase, SA, 50/60Hz | |
Dimensions! Weight | W570 x D280 x H330 mm/ 27 kg |