This tester is used to evaluate the hardness of coated film according to the testing machine method. Scratching the paint surface with a pencil attached at a 45• angle, the operator is to determine the hardest pencil that does not tear or damage the coated film. The tester can also be used to evaluate the hardness of decorative sheet and resistance to solvents on enameled wire.
JIS-(C3003), C3216-4, 00202, (K5400), K5600-5-4, K5651, K6894, K6902,ASTM-02197, 03363,150-15184, IEC-60521-4
Product Description
This tester is used to evaluate the hardness of coated film according to the testing machine method. Scratching the paint surface with a pencil attached at a 45• angle, the operator is to determine the hardest pencil that does not tear or damage the coated film. The tester can also be used to evaluate the hardness of decorative sheet and resistance to solvents on enameled wire.
Specification
| Model | No.553 | No.553-M |
| Specimen Base | 100 x 180 mm | M-1: 100 x 180 mm |
| M-2: 150 x 180 mm | ||
| Stroke | Left-Right Max. 100 mm, Front-Back Max. 50 mm | |
| Scratching Angle | 45′ (60′ for Enameled \Mre) | |
| Scratching Speed | Manual1.75 mm/1 tum | Motorized (Standard 0.5 to 1 mm/s) |
| Test Load | Max. 1 kgf (Balance Weight) | |
| Option | Heating Plate Spec, Conduction Device, Needle (cp3 mm, L23 mm, Top Angle 60′) | |
| Power Source | AC 100 V, 1-Phase, 3A, 50/60Hz | |
