This tester is used to evaluate the bursting strength of textile according to the Mullen Method. The operator is to clamp the test specimen onto the tightening board and apply pressure through a rubber membrane mediator. The maximum pressure when the test specimen bursts subtracted by the strength of the rubber membrane is measured for calculating the bursting strength of the test specimen.
JIS-(L1018), L1085, L1096, (JASO)
Product Description
This tester is used to evaluate the bursting strength of textile according to the Mullen Method. The operator is to clamp the test specimen onto the tightening board and apply pressure through a rubber membrane mediator. The maximum pressure when the test specimen bursts subtracted by the strength of the rubber membrane is measured for calculating the bursting strength of the test specimen.
Specification
| Specimen | 150 x 150 mm |
| Upper cp30.48 ± 0.03 mm | |
| Clamp | Lower cp31.5 + 0.25 mm |
| Upper and Lower both with 60V Groove | |
| Pressing Speed | 98 ±4 ml/min |
| Pressure Gauge | Choose 2 kinds (0.3, 0.6, 1.4, 2.0, 4.5 and 7.0 MPa) |
| Rubber Membrane: 1o pes, Membrane Height Gauge, Fixing Tool | |
| Accessories | |
| Digital Pressure Gauge, Pneumatic Clamp Spec (YPO), Touch Panel Type | |
| Option | |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight | W400 x D400 x HB50 mm/ 80 kg |
| (Approx.) | W400 x D500 x H560 mm/ 85 kg (YPO) |
