This machine has two separated (up and down) heating plates. Insert plastic or rubber ingredients between the plates before clamping them with the plates controlled by manual hydraulic tank. The machine molds the ingredients under steady pressure and temperature. Molded products can be used for testing and color comparison purposes, as well as used as samples applied in mass-production process. The machine is powered by a latest F1C type controller. Users can easily operate the machine guided by clear, conversation-oriented instructions on the panel. Users are also able to read pressure, time and temperature information effortlessly during the test for an overall detail of the process. Through monitoring the procedure, stability of the test is visualized and quality samples are guaranteed.
Product Description
This machine has two separated (up and down) heating plates. Insert plastic or rubber ingredients between the plates before clamping them with the plates controlled by manual hydraulic tank. The machine molds the ingredients under steady pressure and temperature. Molded products can be used for testing and color comparison purposes, as well as used as samples applied in mass-production process. The machine is powered by a latest F1C type controller. Users can easily operate the machine guided by clear, conversation-oriented instructions on the panel. Users are also able to read pressure, time and temperature information effortlessly during the test for an overall detail of the process. Through monitoring the procedure, stability of the test is visualized and quality samples are guaranteed.
Industry
Rubber, plastic
Specification
| Pressure(Tons) | 10, 20, 30, 50 (Tons), or specified capacity | |
| Units | Temperature: ℃, ℉ Area: m2, cm2, mm2, ft2, in2 Force: kgf, gf, tonf(long), tonf(short), lbf, ozf, kN, N, tonf(SI) Pressure: bar, kgf/cm2, KPa, MPa, mm-Aq(4℃), psi |
|
| Temperature | Room temperature up to 300℃ | |
| Temperature range |
Temperature rising rate: 50℃ to 150℃ à about 18 minutes Cooling rate: 150℃ to 60℃ à about 10 minutes (water cooling) |
|
| Cooling method | Water cooling circulation (optional) | |
| Dimension of a heating plate | 10, 20 tons: 25x25cm (standard) |
30, 50 tons: 30×30 cm |
| Distance between heating plates |
60 to 100 mm (adjustable) | |
| Accessories | 1 piece of 200 x 200 x 2mm or 250 x 250 x 2 mm forming mold (choose 1) |
|
| Control | 7”touch panel | |
| Display | Real-time force, temperature | |
| Power | Single phase, 220V/50Hz or 60Hz | |
| Dimension | 53×62×145 cm (W×D×H) | |
| Weight | 10 tons: about 200kg, 20 tons: about 250kg 30 tons: about 300kg, 50tons: about 350kg |
|
