This benchtype machine is designed for the best convenience of users, with four rigid columns and adjustable heating plates. The machine has two separated (up and down) heating plates. Insert plastic or rubber ingredients between the plates before clamping them with the plates controlled by manual hydraulic tank. The machine molds the ingredients under steady pressure and temperature. Molded products can be used for testing and color comparison purposes, as well as used as samples applied in mass-production process. The machine is powered by a latest F1C type controller. Users can easily operate the machine guided by clear,conversation-oriented instructions on the panel.

Users are also able to read pressure, time and temperature information effortlessly during the test for an overall detail of the process. Through monitoring the procedure, stability of the test is visualized and quality samples are guaranteed.


Product Description

This benchtype machine is designed for the best convenience of users, with four rigid columns and adjustable heating plates. The machine has two separated (up and down) heating plates. Insert plastic or rubber ingredients between the plates before clamping them with the plates controlled by manual hydraulic tank. The machine molds the ingredients under steady pressure and temperature. Molded products can be used for testing and color comparison purposes, as well as used as samples applied in mass-production process. The machine is powered by a latest F1C type controller. Users can easily operate the machine guided by clear, conversation-oriented instructions on the panel.

Users are also able to read pressure, time and temperature information effortlessly during the test for an overall detail of the process. Through monitoring the procedure, stability of the test is visualized and quality samples are guaranteed.

Industry
Rubber, Plastic


Specification

Pressure 5, 10 ton
Units Temperature: ℃, ℉
Area: m2, cm2, mm2, ft2, in2
Force: kgf, gf, tonf(long), tonf(short), lbf, ozf, kN, N, tonf(SI) Pressure: bar, kgf/cm2, KPa, MPa, mm-Aq(4℃), psi
Temperature Room temperature up to 300℃
Temperature range 50℃→150℃ around 18mins
150℃→60℃ around 10mins
Cooling method Water cooling system (optional)
Size of heating plate 15 × 15 cm
Distance between heating plate 60 to 100 mm (Adjustable)
Accessories 1 piece of 100 mm x 100 mm x 2 mm forming mold
Control 7” touch screen
Display Real-time force, temperature
Power Single phase 220V/50 or 60HZ
Dimension 69 x 35 x 75 cm (W x D x H)
Weight Around 110 kg


Download catalog

QC-677T Manual Thermos Press Forming Machine catalog (pdf)