QC-527M2F test range can do low and high speed peel test and also for 45/90/135/180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, test low-stick adhesive label tear force. High speed peeling force generally uses 10-30m/min to proceed with test, simulate peeling force during label forming and labeling speed for end users.
ASTM D1000, ASTM D3330, ASTM D1894
Product Description
Features :
- Automatic reading of load cell feature information
- Automatic reading of displacement sensor feature information
- force display, displacement display, time display, stress display and strain display
- External analog input (2-channel simultaneous reading of voltage or current)
- Test force automatically zero
- Test force self-defined calibration
- Break detection
- Automatic return
- Force overload protection
Specification
| Model | QC-527M2F | |
| Maximum capacity | 500 N | |
| Units | Force:gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) | |
| Pressure : Kpa, Mpa, psi, bar, mm-Aq, mm-Hg | ||
| Force resolution | 31bits | |
| Force precision | 1/100,000 | |
| Test stroke {w/o grip) | 600mm | |
| Stroke resolution | 0.0001mm | |
| Speed range | 100 – 30,000mm/min (adjustable by software) | |
| PC-Port | RJ45(TCP/IP) [software optional] | |
| Sampling rate | 1200Hz (Max.) | |
| Motor type | Servo motor | |
| Hardware safety protection | Upper limit, lower limit, emergency stop button | |
| Feature | *Automatic reading of load cell’ s information | |
| *Automatic reading of displacement sensor’s information | ||
| *Externalanalog input (voltage or current) | ||
| *Protection from overload | ||
| Power Supply | Single phase 200 – 240VAC, 15A | |
| Dimension | 125 × 44 × 71 cm | |
| Weight | 100 kg | |
