These models can perform both specimen cutting and lamination. They feature a
small-sized structure controlled by user-friendly operation.
Product Description
QC-603A is pneumatically driven and designed with a hand safety switch to minimize safety concerns during operation. The tester with different kinds of cutter can quickly cut out various shapes of specimen. This punch is suitable for specimens of soft material such as paper, rubber, plastic and leather…etc.
QC-603C has been upgraded from QC-603A Manual Specimen Punch. The main upgrade is focused on air-hydraulic conversion to reinforce machine’s output that allows to cut harder material. This tester is also pneumatic with safety switch to minimize safety concerns during operation. In addition to soft material, the tester is also applicable for textile, plastic sheet, extremely resilient and thick specimens.
Industry
Rubber, Plastic, Textile
Specification
| Model | QC-603A | QC-603C | |
| Material | Rubber, soft plastic (shore A under 90 degree), leather |
Rigid plastic (Shore A above 90 degree), fabric | |
| Compression Platen Size |
Upper platen φ 145 mm ( rectangle platen for option) Lower platen 260 x 230 mm |
Upper platen: 35 ×16cm Lower platen: 35 x 18cm |
|
| Stroke | 100 mm | 125 mm | |
| Output force | 900 kg | 3000 kg | |
| Power supply | Pneumatic (compressor not equipped with) 3 ~ 6 kg/cm² |
||
| Accessory | Cutting board | ||
| Optional | Cutters of dumbbell shape as below. Different shapes are available based on user’s test requirement | ||
| Feature | ※1. Easy to operate, power-saving, time-saving ※2. Dual switches to ensure more safety |
||
| Dimension | 36 × 43 × 69 cm | 40×38×107 cm | |
| Weight | 55 kg | 80 kg | |
