This tester is used to determine the relative stiffness characteristics of vulcanized or thermoplastic rubber. The tester will record the torsion angle of the test specimen 10 seconds after being twisted 180 degrees.
This procedure is done from 23 •c to the lowest test temperature of the test, so that the temperature (T2, T5, T10, and T100) of which the modulus values are at 2, 5, 10, and 100 can be obtained from the Temp -Angle curve diagram.
JIS-K6261, 150-1432
Product Description
This tester is used to determine the relative stiffness characteristics of vulcanized or thermoplastic rubber. The tester will record the torsion angle of the test specimen 10 seconds after being twisted 180 degrees.
This procedure is done from 23 •c to the lowest test temperature ofthe test, so that the temperature (T2, T5, T10, and T100) of which the modulus values are at 2, 5, 10, and 100 can be obtained from the Temp-Angle curve diagram.
Specification
| Hangings | 4 Hangings |
| Specimen | W3.0 ± 0.2 mm, L40.0 ± 2.5 mm, T2.0 ± 0.2 mm |
| L: 65 ± 8 mm, | |
| Torsion Wire | Torsional Constant: 2.81 mN·m/rad (Standard Wire) |
| Chuck Distance | 25 ± 3 mm |
| Torsion Angle Measurement | Rotary Encoder, Detection: 0.1· |
| Temperature Range | -70 to 30 ·c (Refrigerator & Refrigeration Medium) |
| Temperature Rise | 5 ·c interval (Condition Controlling lime: 5 min) |
| Software | Windows Compatible |
| Accessories | Specimen Setting Jig, Specimen Cutter, Torsion Wire Jig: 1 pc each |
| Power Source | AC 200 V, 3-Phase, 20 A, 50/60 Hz |
| Dimensions/ Weight | V\1650 x D780 x H1,840 mm/200 kg |
| (Approx.) |
