This tester is used to evaluate the falling weight endurance of coated film and point impact strength of plastic film. Attaching the test specimen between the die and the punch, the operator is to drop a weight from a certain height. After the weight has been dropped, the operator is to check for deformations, cracks, and peels caused by the impact. The tester can also be assorted with a low temperature chamber (L type).
JIS-(K5400), K5600-5-3, ASTM-D2794(Plastic), IS0-6272
Product Description
- Model :
- No.517 DUPONT TYPE FALLING IMPACT TESTER
- No.517-L DU PONT TYPE FALLING IMPACT TESTER (WITH REFRIGERATING MACHINE)
- No.517-RP DU PONT TYPE REPETATIVE FALLING IMPACT TESTER
Specification
| Falling Height | 50 to Max. 500 mm | 50 to Max. 1,000 mm |
| (Pitch 50 mm) | (Pitch 50 mm) | |
| Falling Weight | 300 g, 500 g, 1,000 g | 1,000 g, 2,000 g |
| Punch | lip Radius R1/16″, R1/8″, R3/16″, R1/4″ | cp0.5″, cp0.625″ |
| Die | Radius R1/16″, R1/8″, R3/16″, R1/4″ | Indent cp0.64″ |
| Test Plate | Steel Plate, 200 x 100 x T0.6 mm | – |
