TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness.
TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.
- Material : DAIDO 440C medical grade Martensitic stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.
- Surface treatment : polished
- Overall accuracy : ± 2 μm
- Accuracy : better than 3 micron
- Outer dimensions : 80 x 25 x 15 mm (50mm series) 105 x 25 x 15 mm (75mm series)