This tester evaluates the flow properties of molten plastic during the forming process. The molten test specimen, inside the cylinder heated to a specific temperature, is extruded from the capillary die. During the extrusion, the shear stress and the shear viscosity is measured for calculating the melt viscosity of the test specimen. The tester is equipped with an automatic cleaning system which enables the operator to continuously run a single complete test cycle (option of 3 test cycles). The tester can be chosen between a Light Load Type and a Heavy Load Type according to the test specimen’s maximum load.

JIS-1<7199, ASTM-03835, 150-11443


Product Description
  • Model:
    • No.140-SAS (Light Load Type)
    • No.140-SAS (Heavy Load Type)

Specification
Model No.140-SAS (Light Load Type) No.140-SAS (Heavy  Load Type)
Hangings 1 or 3 Hangings (2 kinds)
Maximum Load Max. 10 kN Max. 20 kN
Load Measuring Load Cell: Max. 1 o kN(Scale 0.1 N) Load Cell: Max. 20 kN (Scale 0.1 N)
Ram Speed 0.5 to 500 mm/min 0.5 to 1,000 mm/min
Capillary  Die cp0.5 to cp2 mm (To be specified)
Piston cp9.510 ± 0.005 mm, L6.35 ± 0.10 mm
Cylinder Inner cp9.550 ± 0.025 mm, L160 mm Inner cp9.550 ± 0.025 mm, L200 mm
Temperature Range Max. 400 ·c
Software Windows  Compatible
Accessories Cleaning  Rod (Die & Cylinder),  Solvent Cleaning Device, Powder Specimen Compatible Sample Cup, Cup Holder, Funnel, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench
Option Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device,  Exhaust Fan, Smoke-Detection Sensor
Power Source AC 200 V, 1-Phase, 10 A, 50/60 Hz
Air Source 0.5 MPa or More
Dimensions/ Weight (Approx.)

W600 x D630 x H1,070  mm/

180 kg

W600 x D630 x H1,280 mm/

200 kg


Download catalog

Yasuda 140-Rheometer catalog (pdf)