This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is to place the abrading wheel onto the rotating test specimen at a prescript load and abrade the test specimen. After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the visual difference of the test specimen. This tester is widely used for testing plastic, rubber, decorative sheet, leather, paper, and paint surface.
JIS-A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-01044, TAPPI-T476, JAS, (JASO-M403), IS0-4649, 5470-1I 7784-1/2, 9352
Product Description
This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is to place the abrading wheel onto the rotating test specimen at a prescript load and abrade the test specimen. After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the visual difference of the test specimen. This tester is widely used for testing plastic, rubber, decorative sheet, leather, paper, and paint surface.
Specification
| Model | No.101-H | No.101-HS |
| Turn Table | cp150 mm | |
| Table Rotation | 60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm | |
| Speed | ||
| Test Load | 2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf) | |
| Counter | 6 Digits Preset Counter | |
| Suction Nozzle | Inner cpB mm: 2 pes | |
| Option | Inlet Pressure Gauge, Safety Cover | Safety Cover |
